Thursday 10 February 2011

Using HD Syncs with the MC-1, BS-1 and BS-2


Daniel my French agent set me this test, translate this information from French!

Like a all CB products the MC-1, BS-1 and BS-2 automatically detects the reference video standard, but on some products it is necessary to use the video standard and make make manual settings

The following standards are recognized by CB prioducs
.
SD:- Bi-Level:
PAL: 25fps
SLOW PAL: 24fps or 23.98fps
NTSC: 29.97fps
NTSC BW: 30fps

HD - Tri-level:
24 / 25 / 30 / 48 / 50 / 60Hz:
23.98 / 29.97 / 59.94Hz

The Standard Dependent settings on the MC-1, BS-1 and BS-2
UNIT parameters
Film Std:: 24; 25, 30.
Gen Std:: 24 ; 25, Drop  30.
ReF: : 48; 50, 60.

Normal settings for a 23.98 or 24 fps Video Reference
Film Std = 24 ; Gen Std = 24,  ReF = 48.

Normal settings for a 25 fps Video Reference

Film Std = 25 ; Gen Std = 25,  ReF = 50.

Normal settings for a 29.97 fps or 30fps Video Reference

Film Std = 24 ou 30 ; Gen Std = Drop or 30(Non Drop),  ReF = 60.



Always check the UNIT parameters after changing the video reference standard! The 6 configuration memories may be used to to save a different setting for each video standard